Corrosion Inhibitor Pellets
| Print |

OFFICE TOLL FREE IN CANADA: 1-866-414-1445

 

Stick Name & Description

Many Other Sizes Based on Length & Diameter Are Available

Stock Part No. & Sizes

Stock Edmonton

Manuf. Sizes & Part No.'s

2-3 weeks Delivery

CORROSION INHIBITOR PELLETS

Corrosion Inhibitor Pellets are water soluble pellets designed to release corrosion inhibitor. Surface active which aids in solids removal & control, while helping to eliminate the breeding grounds for micro organisms. Contains Ammonium Quaternary Salt in pellet form. Used in water injection systems, gas wells, cooling towers etc. Specific gravity of 1.15 to 1.25. Pellets will fall readily in brine solutions. Typical treatment of 30 PPM of 4200 U.S. gal. of water would require 1.05 lbs of CIP-25 pellets.

ACL-CIP

40Lb Pail



Foam(Soap) Sticks (Water/Condensate) Self Agitating Foam Stick & Gas Sticks
Sand/Silt/Sludge Stick Disp./Foamer
Condensate Sticks Paraffin Inhibitor Stick Asphaltene Dispersant Stick
Acid & Acid Cap Sticks
Paraffin Inhibitor Pellets
Corrosion Inhibitor Sticks
Acid Pellets H2S & Oxygen Scavenger Sticks
Corrosion Inhibitor Pellets
Scale Inhibitor Stick Sticks for Drilling Operations
Salt Inhibitor Sticks
Scale Inhibitor Pellets
Bug(SRB) Treating Sticks Water Soluble Tubes