Soap Sticks
| Print |

Stick Name & Description

Many Other Sizes Based on Length & Diameter Are Available

Stock Sizes

Note: Small Diameters are in Water Soluble Tubess

Manufutured Sizes

CANADIAN BLOWOUT STICK (FS-1251)

TDS Sheet (Download)

SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

CANADIAN BLOWOUT STICKS are excellent sticks for wells with low bottom hole pressures. Primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads.This stick works well with well's that contain up to 35% condensate.Wells that contain greater than 35% should use SUPERFOAM STICKS (O-65%) 0R > 65% OIL (CONDENSATE) FOAM STICKS or CONDI FOAM STICK.

ACL-4120

3/4 x 15

ACL-4135

1 X 15

ACL-4150

1 1/4 x 15

ACL-4175

1 3/8 x 15

ACL-4180

1 5/8 X 18

COR-FOAM STICK (Cor-Foam)
TDS Sheet (Download) SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

In A Water Soluble Tube

COR-FOAM (FOAMER/CORROSION} STICKS are a unique chemical stick that contains 100% active ingredients that protect wells from corrosion and produce high amounts of foam. This product is contained in a water soluble tube with soluble caps.

ACL-5540

1 1/4 x 9


FISHER KING SC-21 STICK (FS-1257)
TDS Sheet (Download) SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

FISHER KING (SC-21) STICKS are primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads. This stick works well with well's that contain up to 35% condensate.Wells that contain greater than 35% should use SUPERFOAM STICKS (O-65%) 0R > 65% OIL (CONDENSATE) FOAM STICKS or CONDI FOAM STICK.

ACL-4010

5/8 x 15

ACL-4050

1 1/4 x 15

ACL-4075

1 3/8 x 15

ACL-4020

3/4 X 15

ACL-4035

1 X 15

GAS WELL CONDENSATE FOAM STICK™ (Fluro)

TDS Sheet (Download)

SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

(CONDENSATE) CONDI FOAM STICKS are primarily used to increase production by removing condensate and water from gas-condensate wells. The foaming action decreases the hydrostatic back-pressure which increases gas production which further enhances the foaming action until the well unloads. Water must be present to enhance the foaming action in wells with BHT less than 130 degrees Fahrenheit. Designed for wells where the column has over 75% or higher condensate.

ACL-8250

1 1/4x 15

ACL-8220

3/4 x 15

ACL-8235

1 x 15

ACL-8275

1 3/8 x 16

HYDROCARBON LIQUID FOAM STICK™ (QF-85)

TDS Sheet (Download)

SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

In A Water Soluble Tube

HYDROCARBON LIQUID FOAM STICKS™ are concentrated foam sticks containg 100% active surfactants. The stick is especially effective in a hydrocarbon lace water enviroment.

ACL-2640

1 1/4 x 12

ACL-2650

1 1/4 x 15

HYDRA FOAM STICK (FS-1233)
TDS Sheet (Download) SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

HYDRA FOAM STICKS are primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads. This stick also works well in wells with hydrocarbon content that may inhibit foam production by other sticks.

ACL-7650

1 1/4 x 15

ACL-7620

3/4 X 15

ACL-7635

1 X 15

ACL-7675

1 3/8 x 15

KWIK-N-DRY STICK (Chico)
TDS Sheet (Download) SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )


In A Water Soluble Paper

KWIK-N-DRY SOAP STICKS are water-soluble sticks containing a high foaming surfactant formulated to dissolve quickly with little or no agitation. Excellent results in bring a well up to production levels quickly. Works well in wells that the operator has to blow down.

ACL-3030

1 3/8 x 5 1/2 (Discontinued)

1 1/4 x 7 (Replacement)

ACL-3030

1 x 10 1/2

ACL-3050

1 1/4 x 15

LIFTOUT FOAM STICKS (Blowout)
TDS Sheet (Download) SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

LIFTOUT FOAM STICKS are primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads. This stick works well with well's that contain up to 35% condensate.Wells that contain greater than 35% should use SUPERFOAM STICKS (O-65%) 0R > 65% OIL (CONDENSATE) FOAM STICKS or CONDI FOAM STICK.

ACL-4750

1 1/4 x 15

ACL-4720

3/4 X 15

ACL-4735

1 X 15

LIQUID FOAM STICK (Liquid)
TDS Sheet (Download) SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

In A Water Soluble Tube

LIQUID FOAM STICKS are a highly active, very concentrated liquid foaming agent, contained in a water soluble tube. Used as an aid for unloading produced water in gas wells contaminated with brine, hydrocarbons and/or dissolved solids. This stick also works well in wells with high brine or condensate levels to 65% wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS OR CONDI FOAM STICKS.

ACL-2525

1 1/4 x 7 1/2

ACL-2550

1 1/4 x 15

ACL-2545

1 1/4 X 12

ACL-2560

1 1/4 X 18

MAX FOAM STICK (BT-10)
TDS Sheet (Download) SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

In A Water Soluble Bag

MAX FOAM STICKS™ are Special foam sticks that contain one of the highly active surfactants that can be put in stick form ,active surfactants, friction reducer and foam stabilizer in water-soluble tubes. Works excellently in wells that contain condensate up to 65%. Wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS or CONDI FOAM STICKS.

 

ACL-5220

3/4 x 15

ACL-5250

1 1/4 x 15


OIL (CONDENSATE) FOAM STICK™ (Oilfoam)
TDS Sheet (Download) SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

(CONDENSATE) OIL FOAM STICKS are primarily used to increase production by removing condensate and water from gas-condensate wells. The foaming action decreases the hydrostatic back-pressure which increases gas production which further enhances the foaming action until the well unloads. Water must be present to enhance the foaming action in wells with BHT less than 130 degrees Fahrenheit. Designed for wells where the column has over 65% condensate. For wells that require a stronger condensate stick please use the CONDI FOAM STICK.

ACL-8020

3/4 x 15

ACL-8035

1 x 15

ACL-8050

1 1/4 x 15

ACL-8090

1.9 x 18

ACL-8075

1 3/8 X 16

PROFOAM STICK (Loredo)
TDS Sheet (Download) SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

In A Water Soluble Tube

PRO FOAM STICKS™ are Special foam sticks that contain 100% active surfactants, friction reducers and foam stabilizers in water-soluble tubes. Excellent in wells that contain condensate up to 65%. Wells that contain greater than 65% should use the GAS CONDENSATE,OIL (CONDENSATE) FOAM or CONDI FOAM STICKS

ACL-5150

1 1/4 x 15


SAND FOAM STICK (Sand)
TDS Sheet (Download) SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

SAND FOAM STICKS ( “SAND, SLUDGE & SILT” dispersant c/w foamer) are designed to convert dense sludge and silt deposits into light non adherent agglomerates that permit easy dispersion. Foaming agents aid in the unloading of natural gas wells where water buildup reduces production.

ACL-3520

3/4 x 15

ACL-3550

1 1/4 x 15

SLICK STICK (Slick A)
TDS Sheet (Download) SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

SLICK STICKS are water-soluble sticks containing a combination of surfactants and friction reducer. This stick can be used in wells which contain levels of condensate to 65%; Wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS or the CONDI FOAM STICKS.

ACL-7550

1 1/4 x 15

ACL-7510

5/8 X 15

ACL-7535

1 X 15

ACL-7575

1 3/8 X 16

SLICK WILLIE OIL FOAM STICKS (SWOF)
TDS Sheet (Download) SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

In A Water Soluble Tube

SLICK WILLIE OIL FOAM STICKS are especially effective in a water, condensate and hydrocarbon environment. Special sticks that contain 100% active surfactants, friction reducer and foam stabilizer in water-soluble tubes. Natural gas bubbling through the water column and 100% active ingredients produces foam which can help remove water from watered-up gas wells.

ACL-8120

3/4 x 15

ACL-8150

1 1/4 x 15

SLOWPOKE FOAM STICK (SC-21)
TDS Sheet (Download) SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

Primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads. This slower dissolving stick also works in wells with high brine or condensate levels.This stick works well with well's that contain up to 35% condensate.Wells that contain greater than 35% should use SUPERFOAM STICKS (O-65%) 0R > 65% OIL (CONDENSATE) FOAM STICKS or CONDI FOAM STICK.

ACL-4650

1 1/4 x 15

ACL-4620

3/4 X 15

ACL-4635

1 X 15

SUPER FOAM STICK (Superfoam B)
TDS Sheet (Download) SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

In A Water Soluble Tube

SUPER FOAM STICKS are a stick that contains 100% active foamer in a water soluble tube that can produce up to four (4) times more foam than some other sticks on the market. This stick can develop stable foam in high temperature deep gas wells. This stick works well with well's that contain up to 65% condensate.Wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS or CONDI FOAM STICKS.

 

 

ACL-5020

3/4 x 15

ACL-5040

1 1/4 x 9

ACL-5050

1 1/4 x 15

ACL-5070

1 3/'8 x 5 1/2

ACL-5065

1 1/4 X 18

ULTRA FOAM STICK (Fizz)
TDS Sheet (Download) SDS Sheet ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

In A Water Soluble Bag

ULTRA FOAM SELF AGITATING STICKS are sticks that requires no agitation as it has a self agitating agent built in. This stick is also very effective in high brine environments. Primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads.

ACL-3120

3/4 x 15

ACL-3150

1 1/4 x 15

LINKS

LINKS

LINKS

Soap Sticks Self Agitating Foam Stick & Gas Sticks
Sand/Silt/Sludge Stick Disp./Foamer
Condensate Sticks Paraffin Inhibitor Stick Asphaltene Dispersant Stick
Acid & Acid Cap Sticks
Paraffin Inhibitor Pellets
Corrosion Inhibitor Sticks
Acid Pellets H2S & Oxygen Scavenger Sticks
Corrosion Inhibitor Pellets
Scale Inhibitor Stick Sticks for Drilling Operations
Salt Inhibitor Sticks
Scale Inhibitor Pellets
Bug(SRB) Treating Sticks Water Soluble Tubes