|
PROTOCOL K – 300I
Cleaner / Degreaser
ENVIRONMENTALLY FRIENDLY. CFIA APPROVED. Protocol K-300i carries the Ecologo signifying certification by Canada's Environmental Choice Program, under the C.E.P.A. K-300i employs a combination of biodegradable surfactants and builders in a highly concentrated formula that has incredible performance with the added benefit of low environmental impact. K-300i must be diluted depending on the soil load to be cleaned. For use in food plants, see directions.
|
PROTOCOL K – 300I
Directions For Use
Apply solution using a sprayer, sponge, pressure washer, or brush. Let stand for 10 - 30 seconds. Some agitation may be required. Wipe with a damp cloth or rinse with water. Dilution rates (K-300i:Water): Light soils: 1:32, Medium soils: 1:20, Heavy soils 1:15. Food contact surfaces must be rinsed with potable water before reuse. Please refer to our dilution chart from more detailed information.
|
PART NO.
AC-PK300I-1 -- 12 X 1L CASE
AC-PK300I-4 -- 4 X 4L CASE
AC-PK300I-20 -- 20 LITRE PAIL
AC-PK300I-205 -- 205 LITRE DRUMS
|
|
PROTOCOL K – 301
Industrial Cleaner Degreaser
ENVIRONMENTALLY FRIENDLY. CFIA APPROVED. Protocol K-301 is an all purpose industrial cleaner/degreaser concentrate (must be diluted), designed to quickly penetrate dirt, oil, grease, pigments, and other everyday soils. K-301 is safe to use on any surface. This unique and carefully chosen blend of non-ionic, biodegradable surfactants and builders enables K-301 to outperform traditional water soluble cleaners when used comparatively. For specific use in food plants, see directions.
|
PROTOCOL K – 301
Directions For Use
Apply solution using a sprayer, sponge, soft brush, or cloth. Let stand for 10 - 30 seconds. Some agitation may be required. Wipe with a damp cloth or rinse with water. Food contact surfaces must be rinsed with potable water before reuse. Dilution Rates (K-301:Water) Light soils: 1:150, Heavy soils: 1:30, Truck/car wash: 1:80. Please refer to our dilution chart for more detailed information.
|
PART NO.
AC-PK301-1 -- 12 X 1L CASE
AC-PK301-4 -- 4 X 4L CASE
AC-PK301-20 -- 20 LITRE PAIL
AC-PK301-205 -- 205 LITRE DRUMS
|
|
EXTRACT
Carpet Extraction Cleaner
This tangerine scented, heavy-duty carpet cleaner is designed for use in hot water extraction equipment. As a result of short contact time with the carpet, this product is tailored to be extremely fast acting. Its unique blend of builders quickly binds and sequesters soils leaving carpets clean and vibrantly bright.(801)
|
EXTRACT
Directions For Use
For hot water extraction, use 6 - 23 mL of product per L of water in the solution makeup tank. For use in traffic lanes, dilute 125 mL of product with 1 L of water. Spray a fine mist over traffic lanes prior to cleaning. Shake well before using.
|
PART NO.
AC-BO-1 -- 12 X 1L CASE
AC-BO-4 -- 4 X 4L CASE
AC-BO-20 -- 20 LITRE PAIL
AC-BO-205 -- 205 LITRE DR.
|
|
HOTWIRE
Carpet Cleaner
This tangerine scented, low foaming solution for use in steam cleaning systems quickly and effectively removes dirt, grease, and stains from carpet fibres. Its unique blend of wetting agents leaves carpets clean and bright(802)
|
HOTWIRE
Directions Fot Use
For hot water extraction, use 6 - 23 mL of product per L of water in the solution makeup tank. For use in traffic lanes, dilute 125 mL of product with 1 L of water. Spray a fine mist over traffic lanes prior to cleaning. Shake well before using.
|
PART NO.
AC-ST-1 -- 12 X 1L CASE
AC-ST-4 -- 4 X 4L CASE
AC-ST-20 -- 20 LITRE PAIL
AC-ST-205 -- 205 LITRE DR.
|
|
TRACKOUT
Powdered Carpet Cleaner
This powdered, concentrated, low-foaming, pH-buffered detergent is designed for use in all hot water extraction and steam cleaning systems. It promotes rapid penetration of dirt, grease and other soils by providing quick wetting of fibres. This specialized, lemon scented formula enables soil removal, leaving carpets clean and bright.(804)
|
TRACKOUT
Directions For Use
For hot water extraction, prepare a ready-to-use solution by diluting 30 - 60 mL of product with 20 L of water. A stock solution can be made by dissolving 0.5 kg - 0.75 kg of product in 20 L of hot water.
|
PART NO.
AC-SS-1 -- 12 X 1L CASE
AC-SS-4 -- 4 X 4L CASE
AC-SS-20 -- 20 LITRE PAIL
AC-SS-205 -- 205 LITRE DR.
|
|
DIRTAWAY
Carpet Shampoo
This concentrated carpet shampoo is designed for use in rotary type machines. It penetrates carpet to loosen soil and bring it to the surface. It also contains a combination of synthetic detergents chosen for their abilities to clean all types of modern-day carpeting and rugs.(805)
|
DIRTAWAY
Directions For Use
For most applications use 5 ml of product per L oF water.
|
PART NO.
AC-SS-1 -- 12 X 1L CASE
AC-SS-4 -- 4 X 4L CASE
AC-SS-20 -- 20 LITRE PAIL
AC-SS-205 -- 205 LITRE DR.
|
| LOVINGCARE
Carpet Cleaner
This unique chemical blend is designed as a versatile pre-treatment that will loosen and emulsify the most stubborn, ground in soils. It can also be used as a routine maintenance product for surface cleaning with a yarn bonnet or synthetic carpet pad.(806)
|
LOVINGCARE
Directions For Use
For large areas, use a pump sprayer for best results. Use 20 mL of product per L of water. Spray liberally onto traffic lane and other spotted areas. Allow to sit for about 3 - 5 minutes before using extractor or shampoo machine. For extremely heavy soils, use 50 mL per L of water. For use with a yarn bonnet, use 20 - 50 mL per L of warm water. Soak bonnet in bucket and wring thoroughly. Buff carpet.
|
PART NO.
AC-SS-1 -- 12 X 1L CASE
AC-SS-4 -- 4 X 4L CASE
AC-SS-20 -- 20 LITRE PAIL
AC-SS-205 -- 205 LITRE DR.
|
