|
Product Name & Description
|
Part # & PKG
|
Click to Download
|
|
ROUGHNECK
This blend of surfactants, builders and organic based materials provides excellent surface wetting, emulsification and oil assimilation with superb foaming abilities. The detergency of this product will remain constant even in extreme water conditions. This product may be used straight, or diluted with water. It is used as a chemical for circulating, foaming, steaming, or pressure washing. It is also designed to clean by-products of crude oil. For example, circulating a dilution of product mixed with hot water will remove asphaltenes, waxes, and iron sulfide from flow lines and exchangers, and clean holding tanks, vessels, treaters, and slug catchers. This product will also reduce weak acidic gases such as hydrogen sulfide and carbon dioxide. (903)
|
Directions For Use
Circulation: Mix product with water at a 5% solution, circulate for 1 - 2 hours, flush from system. Steaming: Use a 1:20 ratio of product with hot water for normal steam wash jobs, for heavy soils mix at a ratio of 1:10 with hot water. Pressure Washer: Mix product at a 1:10 dilution rate with water for normal pressure washing, for lighter soil load mix at 1:25 or higher.
|
ACL-ROU
1025L Tote-205L Drum
20L Pail
|
|
CITRACLEAN
This heavy duty water based citrus degreaser is designed for cleaning shop floors, heavy equipment & parts. Its unique blend of surfactants and organic solvents eliminate the toxicity and odour problems commonly associated with petroleum and chlorine based products. This microemulsion will effectively & efficiently remove oil, bitumen, tar, asphalt, and dirt from a wide variety of surfaces.(502)
|
<Directions For Use
Apply this product to the surface with a low pressure pump sprayer, brush, ormop. Let stand for 3 - 5 minutes. If available, rinse surface with a highpressure washer or hot steam system. Use in well ventilated areas
|
ACL-CIC
1025L Tote-205L Drum
20L Pail
|
|
CITRAWASH
This powerful water based degreaser containing d-limonene is designed for a wide variety of institutional and residential applications. It effectively removes oil, grease, and dirt from all surfaces while leaving a fresh citrus scent.(614)
|
Directions For Use
For light cleaning, use 40 - 100 mL of product with 4 L of water. For medium cleaning, use 120 - 240 mL of product per 4 L of water. For heavy cleaning, use 1 - 2 L of product per 4 litres of water. For heavy-duty industrial cleaning, use product undiluted. Spray onto surface and allow to stand for 5 - 10 minutes depending on the nature of soil being removed. Rinse with water. Use in well ventilated areas.
|
ACL-CIW
1025L Tote-205L Drum
20L Pail
|
|
TRIPLEPHASE
CFIA Approved. This highly alkaline, concentrated water based degreaser is specially designed for fast and effective removal of grease, oil, and dirt while sanitizing. It contains a unique blend of surfactants and powerful grease cutting agents that quickly penetrate and emulsify grease and oil from any surface. This product may be used in a broad spectrum of applications in various industries, including restaurants, garages, factories, industrial shops, and warehouses. For specific use in food plants see, directions.(616)
|
Directions For Use
For heavy-duty cleaning, dilute 1 part product to 20 parts water. For general cleaning, dilute 1 part product to 100 parts water. For pressure washing, dilute 1 part product to 200 parts water. Spray or wipe onto surface and rinse completely with water. To sanitize, dilute 1 part product to 20 parts water. Food contact surfaces must be rinsed with potable water before reuse.
|
ACL-TRI
1025L Tote-205L Drum
20L Pail
|
|
BIG RED
Big Red CFIA Approved. This concentrated water based degreaser is specially designed for fast and effective removal of grease, oil and dirt. With a unique blend of surfactants and powerful grease-cutting agents, this product quickly penetrates and emulsifies grease and oil from most surfaces. This product may be used in a broad spectrum of applications in various industries, including garages, factories, industrial shops, and warehouses. For specific use in food plants, see directions.(501)
|
Directions For Use
For heavy-duty cleaning, dilute 1 part product to 6 parts water (160 mL to 1L). For general cleaning, dilute 1 part product to 20 parts water (50 mL to 1L). For pressure washing, dilute 1 part product to 100 parts water (5 mL to 1L). Spray or wipe onto surface. Rinse completely with water. Food contact surfaces must be rinsed with potable water before reuse.
|
ACL-BRD
1025L Tote-205L Drum
20L Pail
|
|
CLEANUP
This multipurpose water based cleaner / degreaser is specially designed for fast and effective removal of grease, oil, and dirt. It contains a unique blend of surfactants and powerful grease cutting agents that quickly penetrate and emulsify grease and oil from any surface while leaving behind a fresh lemon scent. This product is handy to have around for general everyday cleaning and is great for garages, factories, industrial shops, warehouses, restaurants, hotels, motels, and offices. 543)
|
Directions For Use
This product is ready to use for heavy duty cleaning applications. It is recommended that for everyday spray-and-wipe jobs, dilute 1 part product with 5 parts water.
|
ACL-CLU
1025L Tote-205L Drum
20L Pail
|
|
PHASER
This heavy-duty, alkaline industrial cleaner is ideal for cleaning grime, oil, solvents and other dirt from shop floors, equipment and parts. Cutting edge surfactant technology effectively penetrates and emulsifies grease and oil with little environmental impact. This product can be used in a wide variety of cleaning applications. (995)
|
Directions For Use
Apply product to surface by low pressure pump sprayer, brush, or mop. Let stand for 3 - 5 minutes. It is recommended that the surface then be rinsed with a high pressure washer or hot steam pressure system. Use in well ventilated areas.
|
ACL-PHA
1025L Tote-205L Drum
20L Pail
|
|
LUBECLEAN
LUBECLEAN is a concentrated water based degreaser, specially designed for fast and effective removal of grease, oil and dirt. This unique blend of surfactants and powerful grease cutting agents quickly penetrates and emulsifies grease, oil and many others from most surfaces.
|
Directions For Use
For most cleaning and degreasing operations, a solution of 1 part product to 15- 20 parts water can be applied by mopping or spraying directly onto surface. Stronger solutions can be used to increase the cleaning power. This product can be used in pressure or steam washers at a ratio of 1 part product to 75 parts water. Food contact surfaces are to be rinsed with potable water before reuse.
|
ACL-LC
1025L Tote-205L Drum
20L Pail
|
|
RIG WASH
RIG WASH is a multipurpose water based degreaser that provides fast & effective removal of light oil & dirt.
|
Directions For Use
This heavy duty water based degreaser is designed for cleaning shop floors, heavy equipment and parts. Its unique blend of surfactants and organic solvents eliminate the toxicity and odour problems commonly associated with petroleum and chlorine based products. This will effectively and efficiently remove oil, bitumen, tar, asphalt, and dirt from a wide variety of surfaces.
|
ACL-RW
1025L Tote-205L Drum
20L Pail
|
|
FANTEK 100
FANTEK 100 is a concentrated water soluble detergent designed for cleaning radiators fins and fans. FANTEK 100 integrates new developments in surface chemistry that allow it to quickly penetrate grease, oil and dirt without the use of harsh caustics or solvents. FANTEK 100 is high foaming and when used through a foam generator it can produce rich dense foam. This enhances the contact time with the surface thereby promoting its cleaning potential. It is pH buffered and is safe for use on all types of metals including soft metals such as aluminum.
|
Directions For Use
For heavy-duty application, dilute 1 part product to 4 parts water (250 mL to 1 L). Spray or wipe onto surface. Rinse completely with water. For general cleaning, dilute 1 part product to 10 parts water (100 mL to 1 L). Spray or wipe onto surface. Rinse completely with water. For pressure washing, dilute 1 part product to 75 parts water (15 mL to 1 L).
|
ACL-FA100
1025L Tote-205L Drum
20L Pail
|
|
FANTEK 200
FANTEK 200 is a high quality, highly concentrated Fin Fan Cleaner. It integrates new developments in surface chemistry that allow it to quickly penetrate grease, oil and dirt without the use of harsh caustics or solvents. FANTEK 200 is high foaming and when used through a foam generator it can produce rich dense foam. This enhances the contact time with the surface thereby promoting its cleaning potential. It is pH buffered and is safe for use on all types of metals including soft metals such as aluminum.
|
Directions For Use
For heavy-duty application, dilute 1 part product to 4 parts water (250 mL to 1 L). Spray or wipe onto surface. Rinse completely with water. For general cleaning, dilute 1 part product to 10 parts water (100 mL to 1 L). Spray or wipe onto surface. Rinse completely with water. For pressure washing, dilute 1 part product to 75 parts water (15 mL to 1 L).
|
ACL-FA200
1025L Tote-205L Drum
20L Pail
|
