|
PROXI 3
Cleaner Sanitizer
CFIA approved. This hydrogen peroxide cleaner/sanitizer can used to clean non-porous, hard surfaces such as glass, stainless steel, bathroom surfaces, tile, grout and floors. It can also be used as a carpet extraction pre-spray and spot remover. For use in food plants, see directions.(637)
|
PROXI 3
Directions For Use
For light cleaning, use a solution of 1 part product to 100 parts water. For medium cleaning, use a solution of 1 part product to 50 parts water. For heavy cleaning, use a solution 1 part product to 10 parts water. For cleaning carpets and light spot care, use a solution of 1 part product to 50 parts water. Soak spot, let sit for 10 minutes, and then blot excess. For heavy spot care, use a solution of 1 part product to 10 parts water. Soak spot, let sit 5 - 10 minutes, and then blot with a clean absorbent cloth or extract. For use as a carpet extraction pre-spray or for heavy cleaning, spray (600 ft2 per L) on carpet, let sit for 10 minutes, then extract with clean water. To sanitize, dilute 1 part product to 35 parts water (30 mL per 1 L water) to create a 1100 ppm solution of hydrogen peroxide. Spray or wipe on to surface and let sit for 3 minutes. Food contact surfaces must be rinsed with potable water before reuse.
|
PART NO.
AC-P3-1 -- 12 X 1L CASE
AC-P3-4 -- 4 X 4L CASE
AC-P3 -- 20 LITRE PAIL
AC-P3 -- 205 LITRE DRUMS
|
|
PROXI 3 RTU
Cleaner Sanitizer
CFIA approved. This hydrogen peroxide cleaner/sanitizer can used to clean non-porous, hard surfaces such as glass, stainless steel, bathroom surfaces, tile, grout and floors. It can also be used as a carpet extraction pre-spray and spot remover. RINSE FROM ALL SURFACES For use in food plants, see directions.(635)
|
PROXI 3 RTU
Directions For Use
Apply as is to hard surface to be sanitized. Let sit until dry. Pre-clean heavily soiled surfaces. DO NOT dilute this product.
|
PART NO.
AC-P3R-1 -- 12 X 1L CASE
AC-P3R-4 -- 4 X 4L CASE
AC-P3R-20 -- 20 LITRE PAIL
AC-P3R-205 -- 205 LITRE DRUMS
|
|
PROXI 3 RTU NO RINSE
Cleaner Sanitizer
NO RINSE REQUIRED. CFIA approved. This product is a ready to use hydrogen peroxide based cleaning and sanitizing solution. Active hydrogen peroxide content will not exceed 1100 ppm. It is suitable for cleaning and sanitizing hard non-porous surfaces without a rinsing step. For food plant and other industrial use only. For use in food plants, see directions.(636)
|
PROXI 3 RTU NO RINSE
Directions For Use
Apply as is to hard surface to be sanitized. Let sit until dry. Pre-clean heavily soiled surfaces. DO NOT dilute this product.
|
PART NO.
AC-P3N-1 -- 12 X 1L CASE
AC-P3N-4 -- 4 X 4L CASE
AC-P3N-20 -- 20 LITRE PAIL
AC-P3N-205 -- 205 LITRE DRUMS
|
